It is a long established fact that a reader of a page when looking at its layout.

Contacts

When most houses are constructed, the attic is typically left unfinished. The issue is that this may result in a lot of wasted space and a
homeowner not receiving the greatest deal.

Turning an empty attic into living space is one method to reclaim the space and maximise its worth. Whether you want to add another
bedroom, an exercise room, a home office, or something else entirely, making this area a useful component of your house not only
increases the market value of your home, but it also guarantees that it is being utilised to its maximum potential.

Here are five things to think about before attempting to convert empty space in your loft into living space.

Have a professional builder inspect your home.

Occasionally, converting empty space into usable space necessitates some house modifications. As a result, you should seek the advice
of a professional builder and have him or her examine your house to ensure that your project will not need any structural modifications (or
advise if they will). They’ll also be able to inform you whether the height, breadth, and floor area meet the requirements of the Scottish
building regulations.

There will be a need for assistance.

When most attics are built, they aren’t intended to be used as dwelling areas. As a consequence, the additional weight placed on your
attic floor may be too much for it to bear. If you want the attic to be something other than an attic, you’ll need to install extra floor supports.
Any time you install supports, they must comply with local building regulations, so the expert you engage to inspect your house should be
able to assist you in learning more about what’s required.

Points of Entry and Exit

An attic conversion needs an entrance and exit point. It’s particularly essential to think about the exit since the occupants will need a way
out in the event of a fire or other emergency. There are a variety of items available for use in the attic that may assist with escaping the
house via an attic window.

Determine the room’s purpose and begin the planning process.

Before you begin the project, you should have a rough concept of what the area will be utilised for. You should also have a plan for how
you’ll arrange the area so that you can make the most of every square metre of floor space. Start preparing ahead of time so you have
time to make adjustments before the work is finished.

Issues with Moisture and Temperature

Moisture and temperature are common problems with attics. Lofts can be scorching hot and humid in the summer and freezing cold in the
winter. You’ll need to take steps to ensure that these variables don’t affect the final room’s comfort level.

To do this, you’ll need to install a moisture barrier on the attic’s ceiling and walls. To condition the additional area, you also need to
expand your home’s heating pipework.

It’s a big job to turn unused space into livable space.

It takes a lot of effort to convert an unusable area in a house into habitable space. A DIY house renovator must verify that the area is safe
and in accordance with building regulations by adding insulation and running water and electrical connections. You don’t want to put in all
that effort just to fail inspection due to a little oversight. It is far better to leave such a project to professionals such as Luke Lloyd Builders.

Before you begin, take your time, plan everything out, and get familiar with your local planning regulations. If any permission is needed,
be sure this is in place before you begin. Always work safely, and if you’re uncertain about anything or how it should be done, get expert
advice from ourselves and your local authority planning department.

For attic conversion in Glasgow and Lanarkshire call Luke Lloyd Builders. Click here for more details